среда, 21 января 2015 г.

DIY Pulley for the loungeroom stairs – Go Science Girls

DIY Pulley for the loungeroom stairs – Go Science Girls
DIY Pulley for the loungeroom stairs – Go Science Girls

Make a DIY Loungeroom Pulley - for physics science fun and learning through play

We’ve been wanting to make a pulley for a while now.

I’m not quite sure when exactly the fascination started, but it’s been going for a few months at least. Every time my daughter Jewel asked if we could make one, I couldn’t help but think “Yes, we should to get onto that. We’ll need to look up what to do, and make a trip to the hardware store to gather some supplies, including one of those fancy pulley wheel thingies. But right now we have abc and xyz going on. So we’ll look into it later. Soon…

To be honest, I’d turned it into something that felt a bit daunting.

I’m not necessarily afraid of daunting. But with other things creating busy-ness in our lives, daunting made it easy to keep putting our pulley off until some fictional future time when we’d have plenty of time to research, plan and gather supplies.

But then I realised… it really doesn’t have to be that complicated. By definition, pulleys are a simple machine, after all!

I realised that we don’t have to make the world’s best pulley on our first attempt. In fact, coming up with an OK (but slightly flawed) pulley might actually open up discussions about pulley design, and how we could improve it. So, along those lines, designing an imperfect pulley is probably more educational than coming up with the perfect pulley in the first place… Don’t you think?

So anyway, that’s the back story behind our pulley design. We used what we had on hand, and we just gave it a go.

And, wouldn’t you know, it actually works! (Mostly…)

Try this for preschoolers and up. Our 6 year old daughter Jewel helped with our pulley design and construction. Our 3.75 year old daughter Bee wasn’t so much interested in the design, but she loved playing with the pulley to raise and lower her toys. Older kids could try out a few design modifications to see which works better.

Loungeroom Pulley DIY

How we Made Our Pulley

We used:

  • A chopstick
  • An empty cardboard ribbon spool
  • Rope
  • Two pails
  • Adhesive tack

It took just a few minutes to make this pulley, including gathering the materials. (So much for daunting!)

The kids and I made it together. We decided to place it on the stairs, so the kids could use it to help carry things up and down the stairs.

We inserted the chopstick through the hole in the middle of the ribbon spool, and then attached both ends of the chopstick to the stair railings, so that the chopstick was secured horizontally. We are lucky that our stair railings taper slightly so I could tie on the chopstick without it slipping down. (If you don’t have railings like this, you might need to use tape or another method to secure the chopsticks in place.)

Close up of our DIY pulley

We tied the end of a piece of rope to the handle of a little pail, and threaded the other end over the ribbon spool and down the other side.

We noticed that our ribbon spool wobbled because the hole in the spool was larger than the diameter of the chopstick, so we added adhesive tack to both sides of the spool, to stop it sliding around too much.

DIY Pulley for the loungeroom stairs

Just bear in mind that long ropes can be strangulation hazards. Please be mindful of babies or toddlers who may be nearby, and perhaps take the pulley down when not in use. (All kids’ activities on this blog require attentive adult supervision. Parents and carers will need to judge whether a particular activity is appropriate their child’s age and skill level.)

learning about pulleys through play

The kids discovered they could use the pulley to raise or lower the pail by pulling on, or releasing, small sections of rope. Of course, all manner of items then had to be carried up and down the stairs! Lots of dolls travelled in the “lift”, as well as LEGO bricks, jigsaw pieces, pens and pencils, and lots of other small things.

JJ operating our homemade pulley

Heavier items were harder to lift, hold steady, or lower slowly. If you let go of the rope, the bucket would crash to the floor.

A pulley is a simple machine that uses wheels and rope to change the direction of a force. Normally if you want to lift something, you pull it up. If you attach it to a simple pulley however, you can lift the item up, by pulling down on the other end of the rope.

After a while, we added another pail to the opposite end of the rope. This doubled the efficiency – while one bucket was carrying items up, another could be carrying items back down!

Double pail pulley system

The kids noticed that with two pails, when the pails contained similar weights, the pulley balanced itself out. It only moved when someone pulled on a section of rope, and otherwise remained stationary. It was just as easy to lift light or heavy loads, provided the pails were balanced.

But when the buckets were uneven, the heavier bucket would “pull itself” towards the floor unless someone was holding the rope to stop it.

Pulley play

I should mention that our pulley design isn’t flawless. The adhesive tack helps steady it a little, but the ribbon spool still does wobble (especially when being played with vigorously), which can cause the rope to slip off the spool. The rope also slips off the spool if the buckets are lifted up (which creates slack in the line). But I’d say in general it works well enough for a quick DIY and a first try!

What’s Next?

We’re hoping to try out a few design modifications to see if we can improve on our design. Watch this space!

For more physics fun, you might also like:

Original article and pictures take https://gosciencegirls.com/pulley-loungeroom-stairs-physics-fun-kids/ site

Комментариев нет:

Отправить комментарий